Male press adaptor – composite pipe to 1/2″–1 1/4″
Male press adaptor – composite pipe to 1/2″–1 1/4″ – collection in Hagen
Art.-Nr. HT-125190
Collection from our Hagen warehouse · Im Mühlenwert 22 · Mon–Fri 8:30–17:30, Sat 10–14 · Availability and collection date come with our reply · Shipping by arrangement · Locations
Description
Male press adaptor – This press adaptor connects multilayer composite pipe to a male thread, for example for connection to a manifold, valve or female threaded fitting. Available in 16 × 2 and 20 × 2 mm to 1/2″ or 3/4″, 26 × 3 mm to 1/2″, 3/4″ or 1″, 32 × 3 mm to 1″ and 40 × 3.5 mm to 1 1/4″. Find thread sealants under Consumables.
Technical specifications
| Fitting type | Straight adaptor |
|---|---|
| Connections | 1 × press connection, 1 × male thread |
| Thread standard | The manufacturer's series description specifies tapered thread to ISO 7/1; this has not been verified individually for this item, and the designation (R, Rp or Rc) will be confirmed in our quotation |
| Material | Brass fitting body, AISI 304 stainless steel press sleeve, plastic guide ring; tin plating has not been verified |
| Seal | Double O-ring; seal material confirmed in our quotation |
| Press profile | The permitted press profile depends on the fitting series and pipe size. State the required version and your press profile when enquiring; check the specific system approval before installation. |
| Inspection | A window in the guide ring shows insertion depth; the ring separates pipe and metal to prevent electrochemical reaction |
| Leak Before Press | According to the manufacturer, an incorrectly made press joint immediately shows as a leak |
| Operating limits to manufacturer's table | −20 to +95 °C, max. 10 bar; maximum temperature +120 °C |
| Frost protection | −20 °C only with antifreeze (glycol, max. 30%) |
| Applications to manufacturer's table | Drinking water, hot water, radiators, underfloor heating, cooling, irrigation, compressed air |
| Approval marks | DVGW-approved according to the manufacturer, materials to UBA list; registration number not available |
| Compatible pipe | Aluminium multilayer composite pipe of the same size, such as our PE-X/Al/PE-X pipe; explicit pipe-and-fitting system approval is not available and will be confirmed in our quotation |
| Joint | Permanent joint; for concealed installation, protect metal parts from cement |
| Marking | Manufacturing date on fitting body |
Versions
| Version | Item no. |
|---|---|
| 16 × 2 mm to 1/2″ | HT-125190 |
| 16 × 2 mm to 3/4″ | HT-125191 |
| 20 × 2 mm to 1/2″ | HT-125192 |
| 20 × 2 mm to 3/4″ | HT-125193 |
| 26 × 3 mm to 1/2″ | HT-125194 |
| 26 × 3 mm to 3/4″ | HT-125195 |
| 26 × 3 mm to 1″ | HT-125196 |
| 32 × 3 mm to 1″ | HT-125197 |
| 40 × 3.5 mm to 1 1/4″ | HT-125198 |
Manufacturer and safety (GPSR)
| Manufacturer | GPSR manufacturer information: the manufacturer's name and address are available on request before collection. |
|---|---|
| EU responsible person | Available on request, together with the manufacturer details, before collection. |
| Safety instructions | Install in accordance with the manufacturer's instructions; work on drinking water and heating systems must be carried out by a qualified installer. |
Price per piece incl. VAT. Order item: collect from our Hagen warehouse once the goods have arrived; we will confirm the date in our reply to your enquiry. Delivery on request.
Collection, availability and delivery time
The basket is your enquiry list – no checkout, no advance payment. We reply with price, availability and a collection date. Collection from our warehouse at Im Mühlenwert 22, 58135 Hagen, Mon–Fri 8:30–17:30 and Sat 10–14 by appointment. Shipping by arrangement: we state shipping costs and delivery time in our quotation before you decide. We also deliver to installers with our own driver up to 150 km around Hagen. How the enquiry works · Locations · For installers
Male press adaptor – composite pipe to 1/2″–1 1/4″
Male press adaptor: Technical data, compatibility and installation
Press fitting dimensions, materials and operating limits – and what you need for pressing.
Technical specifications
- Pipe
- Aluminium multilayer composite pipe
- Versions
- 16 × 2 mm to 1/2″, 16 × 2 mm to 3/4″, 20 × 2 mm to 1/2″, 20 × 2 mm to 3/4″, 26 × 3 mm to 1/2″, 26 × 3 mm to 3/4″, 26 × 3 mm to 1″, 32 × 3 mm to 1″ and 40 × 3.5 mm to 1 1/4″
- Material
- Brass fitting body, press sleeve made of AISI 304 stainless steel
- Press profile
- Depends on the fitting series and pipe dimensions; check the specific system approval before installation
- Inspection
- Inspection window for insertion depth; the LBP (Leak Before Press) function reveals incorrect pressing as a leak
- Operating conditions
- Up to 10 bar at −20 to +95 °C, maximum temperature +120 °C; −20 °C only with antifreeze (glycol, maximum 30 %)
- Applications
- Drinking water, hot water, radiators, underfloor heating, cooling, irrigation and compressed air (manufacturer’s table)
- Approval mark
- DVGW-approved according to the manufacturer; we do not have the registration number
Compatible products
- Aluminium multilayer composite pipe matching the fitting dimensions: coil, straight length or pre-insulated, depending on size
- TH-profile press jaw from 16 × 2 to 40 × 3.5 mm
- Calibrator and pipe cutter for preparing the pipe
Installation
- Install in accordance with the manufacturer’s instructions; work on drinking water and heating systems must be carried out by an installer.
- The press connection cannot be disconnected. It can therefore be installed beneath plaster; however, metal parts must not come into contact with cement-based mortar and must be protected with suitable material.
- The inspection window in the press sleeve shows whether the pipe has been inserted far enough.
- Guide: Press fitting or compression fitting: which suits your composite pipe?
Male press adaptor: frequently asked questions
Dimensions, press profile, inspection and operating limits – brief answers.
What pipe sizes is “Male press adaptor” available for?
For aluminium multilayer composite pipe in 16 × 2 mm to 1/2″, 16 × 2 mm to 3/4″, 20 × 2 mm to 1/2″, 20 × 2 mm to 3/4″, 26 × 3 mm to 1/2″, 26 × 3 mm to 3/4″, 26 × 3 mm to 1″, 32 × 3 mm to 1″ and 40 × 3.5 mm to 1 1/4″. Before “auf” is the composite pipe size (outside diameter × wall thickness), followed by the thread size. The outside diameter and wall thickness must match across the pipe, fitting and press jaw.
Which press jaw should be used?
The permitted press profile depends on the fitting series and pipe dimensions. State the version you require and your press profile in your enquiry; the specific system approval must be checked before installation. We offer TH-profile press jaws from 16 × 2 to 40 × 3.5 mm. Whether a jaw fits your pressing tool depends on its jaw mount – state the model in your enquiry.
How can I recognise incorrect pressing?
By the LBP (Leak Before Press) function: if a joint has not been pressed correctly, it immediately shows as a leak. Before pressing, the inspection window in the press sleeve shows whether the pipe has been inserted far enough.
What pressure and temperature is the press fitting designed for?
For operation up to 10 bar at −20 to +95 °C, with a maximum temperature of +120 °C. The −20 °C limit applies only with antifreeze, with a maximum glycol concentration of 30 %. Applications according to the manufacturer: drinking water, hot water, radiators, underfloor heating, cooling, irrigation and compressed air.
Can “Male press adaptor” be installed beneath plaster?
Yes. The press connection cannot be disconnected and can therefore be installed beneath plaster according to the manufacturer. The metal parts must be protected from cement-based mortar with suitable material; your installer will do this.